How To Start Your Equipment With Ceramic Membrane Elements?
After mounting the equipment: Fill the equipment with desalted water. Do not use normal water, chalk inside normal water can reduce the flow rate. Start your equipment and start a normal filtration run. After approx. 10 min. go to max. transmembrane pressure. If necessary, start a normal cleaning run with membrane cleaners. Then rinse the equipment and refill with the fluid you wish to filter. Start filtration.Enable GingerCannot connect to Ginger Check your internet connection
or reload the browserDisable in this text fieldRephraseRephrase current sentenceEdit in Ginger
JIUWU Membrane Products
Related FAQ
December 27, 2018Sizing solutions recovery Indigo recovery Washing effluents Dye baths Washing water with inks from gum printing originAlkaline baths from printed circuits Black liquorsCoating effluent Paper pulp blea...view
November 1, 2018Compared with such traditional filter like polymer membrane, ceramic membrane has many unique advantages: High separate accuracy, limpid and transparent filtrate with little content of impurity;Pure alumi...view
November 1, 2018During filtration by means of ceramic membrane made by JIUWU the medium to be filtered flows through the channels of the membrane carrier. All particles whose size exceeds the pore radius of the membr...view
December 27, 2018Ceramic membrane manufactured by JIUWU HI-TECH is used for liquids separation in a cross-flow filtration way which is different from dead-end filtration.Dead-end filtration means the fluids flow is ve...view
December 27, 2018Jiuwu ceramic membrane resist repeated chemical or thermal sanitizing cycles. Their wide range of pH compatibility enables the filtration of acid or base solutions. They are also compatible with all o...view
November 1, 2018Membrane fouling is a major obstacle to wide spread application of the membrane. It is the phenomenon whereby the membrane permeated flux decreases and the transmembrane pressure (TMP) rise with the p...view